MT2214

Pack includes:

• 2 x side panels, with mitred angles. Also features CNC cutouts and recesses for 3402 handles.
• 1 x Rear panel with mitred angled edges. Pre-cut with recess for 87160 angled connector dish.
• 1 x Top Panel with curved front edge for continuous curve when stacking multiple panels
• 1 x Bottom Panel with curved front edge.
• 1 x Middle brace
• 1 x Angled Reflex Port
• 3 x curved grill supports. 1 has no cutouts, this fits the top of the speaker, the second has a recess underneath for fitting between the two 12" speakers, and the last one has two recesses on the front, and acts as an extension to the reflex port with the recesses reducing the port extension.
• 1 x Divider (optional) - Divider reduces volume to around 70 litres (excuding drivers) 2 x 12" drivers would typically reduce volume by 6 litres, giving an effective volume of 64 litres and shifts cabinet tuning up to about 61 Hz for a tighter punchier bass.
• Without the divider, volume is around 97 litres (excluding drivers) and tuning is around 52 Hz which makes the cabinet a little more general purpose. 2 x 12" drivers, the HF Horn, and compression driver, would typically reduce internal volume by around 10-12 litres, giving an effective volume of around 85 litres.
  
  The front panel is cut from high quality 18mm birch ply, and the other panels are 15mm high quality birch ply.
  
  Dimensions:
  Height: 1000mm
  Width: 440mm (at widest point along front)
  Depth 400m (from front of curve)