Clair Brothers
!

Active Line Array

!

i208-M-90

!
    Loudspeaker Type: Line Array Element Three-Way Active
    Mobile Active type, Rigging quick release pins
    Frequency Response (+/- 3dB): Single Cabinet 60Hz–20kHz
    Recommended Power Amplifier: 1000–1300W @ 8 Ohms
    Sensitivity (1 Watt @ 1 Meter): 103 dB SPL
    Maximum Output Cont: 129 dB SPL, Peak: 132 dB SPL
    Drivers LF: 1x 8 in. (203.2mm), LF/MF: 1x 8 in. (203.2mm), HF: 1x Exit 1.4 in. (35.6mm); VC diameter 3.0 in. (76.2mm)
    Nominal Impedance: LF 8 Ohm, LF/MF 8 Ohm, HF 16 Ohm
    Power Handling Program: (LF) 400W; (LF/MF) 400W; (HF) 220W
    Peak: (LF) 800W; (LF/MF) 800W; (HF) 440W
    Dispersion: 90° H x 10° V
    Input Connection: 2x EP-8 Connectors (1 Male, 1 Female)
    Dimensions: Front Height 232.5mm, Rear Height 142.7mm, Width 733.2mm, Depth 606.5mm
    Weight: 28.1kg

iS118-M

!
    Loudspeaker Type: Mobile High Output Arrayable Subwoofer, Maximum Angle of 10° between cabinets
    Rigging quick release pins
    Frequency Response: (+/- 2dB) Single Cabinet 34Hz–180Hz, -10 dB Point 30Hz
    Recommended Power Amplifier: 2400W @ 8 Ohms
    Sensitivity (1 Watt @ 1 Meter): 97 dB SPL
    Maximum Output Cont.: 133 dB SPL, Peak: 136 dB SPL
    Driver LF: 1x 18 in. (457.2mm)
    Nominal Impedance LF: 8 Ohms
    Power Handling Nominal: 2000W, Peak: 4000W
    Input Connection Standard: 2x EP-4 Connectors (1 Male, 1 Female)
    Dimensions: Front Height 514.0mm, Rear Height: 393.4mm, Width 733.2mm, Depth 771.9mm
    Weight: 65.3kg

iS118-i

!
    Loudspeaker Type: Installation High Output Arrayable Subwoofer, Maximum Angle of 10° between cabinets
    Frequency Response (+/- 2dB): Single Cabinet 34Hz–180Hz, -10 dB Point 30Hz
    Recommended Power Amplifier: 2400W @ 8 Ohms
    Sensitivity (1 Watt @ 1 Meter): 97 dB SPL
    Maximum Output Cont.: 133 dB SPL, Peak: 136 dB SPL
    Driver LF: 1x 18 in. (457.2mm)
    Nominal Impedance LF: 8 Ohms
    Power Handling Nominal: 2000W, Peak: 4000W
    Input Connection Standard: 2x EP-4 Connectors (1 Male, 1 Female)
    Dimensions: Front Height 514.0mm, Rear Height 393.4mm, Width 733.2mm, Depth 771.9mm
    Weight: 63.9kg

iS118-TOP GRID

!
    Top grid for iS118 array

iS118-i208-RRA

!
    Rear rigging arm, iS118/i208
    Interface between combined hanging arrays of iS118 and i208.
    Primarily for permanent installation with small array (<8 cabinets)

i208-GSBP

!
    Ground stack base plate assembly for iS118 array
    For use in iS118 ground stack configuration

i212-M-90

!
    Loudspeaker Type: Line Array Element Three-Way Active
    Mobile Active 3-Way Line Array Element, Rigging quick release pins
    Frequency Response (+/- 2dB): Single Cabinet 45Hz–20kHz
    Recommended Power Amplifier: 1200–1800W @ 8 Ohms
    Sensitivity (1 Watt @ 1 Meter): System Average 106 dB SPL w/ Proprietary Processing
    LF 99 dB SPL, MF 104 dB SPL, HF 107.7 dB SPL
    Maximum Output: 144 dB SPL @ 1M Bandpass Dependent, 139 dB SPL @ 1M Full Bandwidth
    Drivers LF: 2x 12 in. (304.8mm), MF: 4x 6 in. (152.4mm), HF: 2x Exit 1.4 in. (35.6mm); VC diameter 3.0 in. (76.2mm)
    Nominal Impedance LF: 2 x 8 Ohm, MF 8 Ohm, HF 8 Ohm
    Power Handling: LF 1800W, MF 720W, HF 320W
    Dispersion: 90° H x 10° V
    Input Connection: 2x EP-8 Connectors (1 Male, 1 Female)
    Dimensions: Front Height 351.9mm, Rear Height 255.7mm, Width 1066.7mm, Depth 639.8mm
    Weight: 80.3kg

iS218-M

!
    Loudspeaker Type: Mobile Dual Driver Subwoofer, Rigging quick release pins
    Frequency Response (+/- 2dB): Single Cabinet 38Hz–180Hz, -10 dB Point 32Hz
    Recommended Power Amplifier: 2400–4000W @ 4 Ohms
    Sensitivity (1 Watt @ 1 Meter): 103 dB SPL, Maximum Output Cont. 132.5 dB SPL, Peak 134 dB SPL
    Drivers LF: 2x 18 in. (457.2mm)
    Nominal Impedance LF: 4 Ohm (2x 8 Ohm)
    Power Handling Nominal: 1400W, Peak 2800W
    Input Connection Standard: 2x EP-4 Connectors (1 Male, 1 Female)
    Dimensions: Height 640.0mm, Width 1067.8mm, Depth 687.8mm
    Weight: 97.1kg

i212-DOLLY

!
    Transport dolly for (4x) i208-M

iS218-DOLLY

!
    Transport dolly for (2x) iS218-M

Floor monitor actief

!

WEDGE-R

!
    Loudspeaker Type: Two-Way Active 12” Stage Monitor, Right Orientation
    Frequency Response (+/- 2dB): 65Hz–17kHz
    Recommended Power Amplifier: 1200W Peak @ 8 Ohms
    Sensitivity (1 Watt @ 1 Meter): LF 104 dB SPL, HF 108 dB SPL
    Maximum Output Peak: 131 dB SPL
    Drivers: LF 1x 12 in. (304.8mm), HF 1x 2 in. (50.8mm)
    Nominal Impedance: LF 8 Ohm, HF 8 Ohm
    Power Handling: LF 300W Program, HF 220W Program
    Dispersion Proprietary: Asymmetrical
    Input Connections: Standard 2x EP-4 Connectors (1 Male, 1 Female)
    Dimensions: Height 354.0mm, Width 569.7mm, Depth 457.2mm
    Weight: 30.4kg

WEDGE-L

!
Als boven maar nu met:
    Active 12” Stage Monitor, Left Orientation